REAL Phosphor Bronze OverSize Washer Set (2 Washers) For Benchmade Bugout & More for Sale

On eBay Now...

REAL Phosphor Bronze OverSize Washer Set (2 Washers) For Benchmade Bugout & More For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

REAL Phosphor Bronze OverSize Washer Set (2 Washers) For Benchmade Bugout & More:
$5.95

Set of Two REAL Phosphor Bronze OVER-SIZED Washers for your Benchmade Bugout 535, Mini Bugout 533, Bailout 537, Mini-Griptilian 556, Mini-Freek 565 and more. REAL Phosphor Bronze (copper colored) --- Not yellow Brass Like Other Sellers (see photos). Phosphor Bronze Over-Sized Washer Set for Benchmade Bugout 535 and Mini-Griptilian 556 and more. Will fit the following Benchmade Knifes:
*Bugout 535
*Mini Bugout 533
*Bailout 537
*Mini Griptilian 556
*Mini Osborne 945*Mini-Freek 565*TaggedOut 15535 These are designed to fit the 3/16" Pivot Pin in any folding knife on the market, specifically the Benchmade 535 Bugout knife and others as listed above. These Over-Sized washers help the blade to become more ridged in the handle, reducing side-to-side play, while producing the smoothest action and slippage available.
NOTE: THESE WASHERS ARE OVER-SIZED VS. THE BENCHMADE OEM WASHERS.These are Outside Diameter (OD) of 0.50" vs factory 0.365" Please read review comments below as to the advantages of these Over-Sized washers vs. the OEM small diameter washers. Professionals prefer the phosphor-bronze washer material for its ultra-high slip properties, while providing excellent tensile strength a noted characteristic of all high performance folding knives. These are designed for large surface contact and produce the ultimate replacement/upgrade washer system on the market today for this type of design.

Priced as a set of Two Over-Sized washers.
Note: (1 set = 2 washers)

Approximate Size (OD x ID x Thickness) :
Size inches: ( 0.50 x 0.19 x 0.02 ) - (For standard sized Benchmade 535 3/16 Pivot)
Size mm: (12.5mm x 5mm x 0.5mm) Note: These are a Larger diameter than stock to give you Double the surface area for added blade stability. Fast Shipping from Texas. Phosphor Bronze is notable for toughness, strength, low coefficient of friction, and fine grain. Unlike common brass (color difference - Brass is yellow colored, Phosphor Bronze is copper colored),brass is known to corrode easier, phosphorus bronze washers are used in Premium knife making. Please see photos showing the difference - Don't be Fooled by sellers saying they have bronze, check them out yourself.
CUSTOMER REVIEWS Of THESE WASHERS:
"Fast, professional service and delivery. I will swap out all of my Benchmade OEM washers, replacing them each with a REAL Phosphor Bronze OverSized Washer Set. What an amazing difference this SET makes in action and stability! "
"These washers remove any blade play in your knife. This is due to them being about twice the outer diameter of the stock washers. Installed them on a mini bugout 533. These are the washers that benchmade should have included stock. I'm not much of a multi knife guy but if I ever get another benchmade I will be ordering another set of these." "Upgraded/oversized washers for the Bugout (535). Washers make the knife feel a bit more robust when open, however, a bit more stiff to open and close. Overall I like the more robust feeling of the knife and after a month of use the stiffness wore in a bit and feels good. I did polish my washers for a smoother action from the get go and I would highly recommend it." " These are amazing washers. I now prefer these over the OEM. Larger size eliminated a lot of the blade play I had in my Bugout. Quality is top notch. Will be purchasing more to replace the washers in my other Benchmades." " Best washers east of the Mississippi, heck, even west. These are real phosphor bronze not like the brass washers other sellers are advertising as phosphor bronze. Also the washers are very flat, with no burr on either side and nice smooth finish. Lastly, these bugout washers have a slightly larger OD, so it actually reduces side to side play when the blade is open but especially when it's closed and keeps it centered. Plus the seller is honest, helpful, and excellent to deal with. Highly recommended! "