Shapton pro (Width 22mm) Sharpening Stones for Hapstone,Edgepro,Tsprof for Sale

On eBay Now...

Shapton pro (Width 22mm) Sharpening Stones for Hapstone,Edgepro,Tsprof For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Shapton pro (Width 22mm) Sharpening Stones for Hapstone,Edgepro,Tsprof:
$18.64

Notes before purchase

The current versioneliminates the semi-invisible marking on the carbon fiber base, addingversatility to the base.

This product is cut from Shaptonpro (kuromaku) Whetstone , with grit #120 .forHapstone, Apex Edge Pro, Tsprof ,etc.

Stone Material

Shapton pro (kuromaku)

Stone Length

150mm(5.9inch)

Stone Wide

22mm

Stone Thickness

Approximately 5.4mm(0.21inch)

Base Material

Carbon Fibre

Base Length

160mm(6.3inch)

Overall Thickness

9.5~9.8mm

Weight

Approximately 67g

This product is not allowedto be returned. This product is a consumable of fixed angle grinder. Pleaseunderstand the fixed angle grinder in detail before purchasing, and measureyour own fixed angle grinder fixture to ensure successful installation.

On the side of the whetstone, the labels may be different for different batches of products, for example, some products may be spray labels, some may be stamp labels, and the label order may also be different. Rest assured, they are the same product, both cut and machined with Japanese whetstones. If you purchase this product, it means that you do not mind that the form of the label may be different, thank you for your understanding.

Due to the production batch, there may be laser-printed marks on the carbon fiber plate on the back of the whetstone, and some may not. The current new version is unmarked, which provides the versatility of a carbon fiber baseplate.

lThe size of this sharpening stone is about150 ×22 × 5.4mm, the base is a 160mm long 45-degree angle high-strength carbonfiber base at both ends, which is suitable for a variety of fixed-anglegrinders on the market. There is a slight error in the thickness of the sharpeningstone. If there is a slight unevenness, please use the diamond slab orcorrection stone to polish it with water.

l The original stone LOGO patterns onthe actual products may be different or have no patterns due to the processingparts, so those who care should be careful to purchase.

lAttention in use: the sharpening stones madeof magnesium chloride cement cannot be soaked in water for a long time,otherwise it may lead to looseness of the sharpening stones. Direct sharpeningafter water spraying can prolong the service life of sharpening stone, improvecutting, reduce scratches and improve sharpening feel.

l#120 /220/320 sharpening stones can be usedas raw sharpening or rough sharpening, with the largest consumption, #1000-2000 is the middle grit and #5000/8000/12000 is used as a starting point, Theconsumption is small and one can be used for a long time. #30000as the most delicate sharpening stone of shapton at present, 30000 has lowproduction and sales volume and high price. It is one of the models in pursuitof extreme sharpness.

l#120/220/320 because the grit number is lowand the abrasive particles are large, the hand feel is obviously different from#1000 or more; The higher the mesh number, the stronger the sense ofsmoothness.

lThe width of this set of sharpening stone is22mm, which is more suitable for sharpening straight and large curved blades.

lThe base is made of Japanese Toray 3K carbonfiber board, which has high strength, is not easy to deform and can be reused.When the sharpening stone is used up, the sharpening stone can be shoveled downwith a shovel, sprayed with glue remover to remove the surface, polished thesurface of the base with sandpaper, and a new sharpening stone strip can bepasted again.

lStore in room temperature and ventilatedenvironment, avoid direct sunlight and high temperature.