Seeburg SHFA4 Jukebox Amplifier REBUILD KIT New Capacitors Recap Instructions for Sale

On eBay Now...

Seeburg SHFA4 Jukebox Amplifier REBUILD KIT New Capacitors Recap Instructions For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Seeburg SHFA4 Jukebox Amplifier REBUILD KIT New Capacitors Recap Instructions:
$30.00

Up for sale here is this recap kit for a Seeburg SHFA4 amplifier, found in the AY and DS jukeboxes. At this point the amp is over 60 years old, and the old capacitors are weak and failing. We will make them new again!
This kit includes replacement electrolytic and film capacitors to replace all of the old electrolytic, can, wax, paper, and molded capacitors. It also includes instructions to explain how to install everything. The instructions will also go over some basics for working on tube gear. This does not include any tubes or other capacitors or resistors. New caps are Supertech axial 50v and 450v electrolytics, Supertech MPT film capacitors, Nichicon PW radial electrolytics, Panasonic FC radial electrolytics, and one Nichicon LGN radial electrolytic capacitor--you will get the exact parts shown in the pictures. There is one new 1N4007 diode to replace the old selenium rectifier at CR101. These are all high-quality brand new genuine parts, the same parts I use when I work on vintage gear.
The parts included are mostly exact uf replacements, some of which you can\'t really find anywhere else. There are a few that change a little--the 20 uf caps are replaced with 22 uf, the 9 uf 6v are replaced with 10 uf 50v, 50 uf 60v are replaced with 47 uf 100v, and the 200 uf is replaced with 220 uf. These mostly go higher in voltage compared to the originals--the film caps are 630v, the Supertech electrolytics are 50v and 450v, and the Nichicon PW/Panasonic FC caps are 100v. There are axial capacitors to replace the multi-section can capacitor--just disconnect the can and wire in the axial caps under the chassis, using the provided terminal strip.
I will include surprisingly well-written instructions (with a link to download a schematic), but rebuilding tube gear is somewhat complicated, and you should know what you\'re doing and have a decent soldering iron. This kit will not fix everything that could be wrong with your equipment, but it will certainly help. Please see my pictures for details.
If you are looking for a kit for a different jukebox amplifier, just let me know.
US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the \"add to cart\" feature and then check out all at once, and it will combine shipping. If you have any questions, please ask.
Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use \"add to cart\" on everything you want and then check out for combined shipping.