REV USA flag tan on IR Magic Black 3.5"X2" MATT REJ#395 W/VELCRO® BRAND FASTENER for Sale

On eBay Now...

REV USA flag tan on IR Magic Black 3.5"X2" MATT REJ#395 W/VELCRO® BRAND FASTENER For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

REV USA flag tan on IR Magic Black 3.5"X2" MATT REJ#395 W/VELCRO® BRAND FASTENER:
$3.00

REVERSE USA FLAG PATCH TAN ON MAGIC BLACK 3.5"X 2" MATT FINISH
PRINTING REJECT #395 WITH VELCRO® BRAND FASTENER

THESEPATCHES ARE NOT PERFECT BY ANY MEANS. PATCHES MAY HAVE LARGE DIRT PARTICLES,LIGHT GREY STREAKS IN THE TAN AREA,BLURBS INPRINTED IMAGE, OR ACOMBINATION OF THESE DEFECTS.
PATCHES WILL BE IDENTIFIABLE,FUNCTIONAL AND COVERT BUT NOT PRETTY.$3.00 each(Check out our other listing of this product to order a ten pack with a lower price per patch.)

Additional information about this product:

BLACKareas reflect brightly when viewed with infrared equipment. High tempVelcro brand velcro backing.
If you served in Iraq or Afghanistanthis is the probably the same kind ofpatch you used.We do not recommend these patches for use in the field, they are only for collecting. Please purchase SolasX patches for use in the field.Many of the patches considered Collectable patches are uncommon patches, printed for individual units or branches of the military. Many patches have only a limited quantity available for purchase. All of the patches considered collectable are older patches. The patches labeled as "Old Tan" and "Gloss Finish" were printed before 2007. Patches that have a Matt finish were printed after 2007 but before we switched over to the SolasX printing process. All of the Collectable patches are considered "Printing Seconds" and may have printing blemishes or other defects. Printing seconds must not be bent or the topcoat will crack. All of our Printing Seconds are guaranteed to look good at a reasonable distance.Patches that we consider seconds will contain one or more of the following: Small Blemishes in the Image, Large particles or excessive amount of small particle, in the protective top Coat, Small Voids in the protective topcoat, Minor Velcro Issues, Cracking Aged Polyurethane Top Coat.

These are the same type of Infrared patches used by the US Military. The patches are manufactured in our factory here in the USA. Every step of the process is done here at Anytime Sign, artwork, screen printing and die cutting.We use the best quality materials and printing techniques:3M Brand SOLAS (Safety Of Life At Sea) is approved by the U.S. Coast Guard as a retroreflective material used to enhance visibility of life saving equipment in nighttime, or low light conditions. 3M brand SOLAS reflects brightly when viewed with night vision equipment providing crystal-clear friend or foe identification.

The VELCRO®BRAND FASTENER we use has the highest quality acrylic-based adhesive glue andis able to withstand extremely hot climates. HOOK SIDE ON THE BACK OF THE PATCH ONLY, WE DO NOT PROVIDE THE LOOP SIDE .VELCRO® BRAND FASTENER 330 PSA 0172.

Solvent Based Inks. All the inks we use on our patches are Solvent Based. Solvent based inks are better than digitally printed or UV in because they adhere better and have a thicker ink deposit. Solvent based inks will not fade, even if they are left outdoors for years.Magic Black Infrared Ink. Magic Black is made and developed by Anytime Sign. We regulate the quality and thickness for ultimate opacity in the visible spectrum. In the infrared spectrum Magic Black becomes transparent allowing for the 3M SOLAS to reflect light back to Night Vision equipment, providing crystal-clear friend or foe identification.Patches will only ship within the USA. Agencies of the United States Government will have access to orderinformation. Listing complies with Policy.

VELCRO® is a registered trademark of Velcro BVBA, used with permission.