NEW REPLACEMENT EDISON STANDARD B C D or E PHONOGRAPH RUBBER DRIVE BELT for Sale

On eBay Now...

NEW REPLACEMENT EDISON STANDARD B C D or E PHONOGRAPH RUBBER DRIVE BELT For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

NEW REPLACEMENT EDISON STANDARD B C D or E PHONOGRAPH RUBBER DRIVE BELT :
$15.00

Note: If your crank DOES NOT screw in but is an S-shaped SLOTTED crank that just pops on and off the shaft, you do NOT have a Standard B or higher; you have a Standard A machine and need my other belt (see the photo for a B and higher crank). DON\'T GO BY THE REPRODUCER, WHICH MAY SAY \"MODEL C.\" Go only by the crank. If it pops on and off, rather than screwing on, you have a MODEL A MACHINE! THIS BELT WON\'T WORK ON THAT MACHINE. You need to be sure you order the right belt. GO BY THE CRANK TYPE and make sure you have a STANDARD model rather than a HOME or other Edison machineHere is a drive belt that is ideal for the Edison Standard Model B C or D Phonographs.

These are far better than leather belts. Leather belts may be original, but they don\'t run smoothly, loosen in cold, shrink in heat, crack, and slip more easily if oil gets on them. Plus, this throw-on belt saves you the hassle of measuring, gluing and/or sewing together. I\'ve been using them for years, haven\'t had to replace one yet, and love their performance. But don\'t just take my word for it--here\'s what some of my customers have said about these belts:

You would not believe what the English climate can do to machines, let alone to its own devices for a century or more. I have used your belts for 5 or 6 years now, and there has never been a better method of doing the job. The improvement and ease of operation, reliability and constancy of speed is almost unbelievable, and you can stick that on your website with my compliments.

I ordered a leather belt but the glue made a lump. My wife stitched it together but it still doesn\'t work smoothly.

I can\'t believe I\'ve been suffering with a leather belt all these years! Whoever is considering this belt, JUST ORDER IT! ...you won\'t be sorry... now I have to ... (or GET to)... go through all the cylinders and finally stop worrying! THANKS SO MUCH FOR THIS PRODUCT! Phil

I suppose it is at least 3 years since I bought my first one for my Edison Standard, model D. Never a slip or misalignment. Perfect speed regulation, because the tension is just right.

Thanks guy. I am sick of mandrels wowing because I can\'t splice leather together to save my life...

Go with the rubber! Had me up and running in minutes. Much better than leather.

A++ Wonderful item!

I really want to try that rubber belt, I\'m fed up with glueing!!

Belt works great.Sorry for the delay in response.Happy with purchase. THANKS

Item arrived worked well-i am happy with it.

Nice item.

Cool works great.

Arrived as described. Thanks!!

This rubber belt works perfectly with my Edison Standard Model B. Great!!!

If you have a Model D or E and are unsure how to change the belt, you simply loosen the screw to the mandrel drive pulley. This will allow you to slide the shaft over to the right and thus open a hole to remove the old belt and then position the new. Only takes about 30 seconds. Just don’t lose the screw! Then slide the mandrel back all the way to the left, slide the mandrel pulley back to its original position and tighten that down. Then slip the belt onto the top pulley and you’re set. If the belt should ever slip off while running, by the way, this means the pulleys are misaligned. Typically you must loosen the bottom pulley and slide it to the right or left until the condition stops

PLEASEIGNORE REFERENCES TO “FREE 4 DAY SHIPPING”!! I didn’t write that--generates that. It ALWAYS takes longer than 3 days to get these. Cross countrytypically takes a week-10 days depending on USPS. In fact, I list ECONOMYSHIPPING, which has a 9 day shipping time, just to be safe, but seems tothink that means just 4 days! You’d need Priority Mail for a 4 day shipping time. Figureat least a week. Otherwise, shipping is free in a letter envelope w/no tracking. Tracking would add FIVE DOLLARS to the order.If you would like or need tracking, let me know and I will set up a buy it now for you, and add $5 to the order.