2-Pieace Set of Japanese Vintage Kanna Hand Plane , 長秀 and 儀助, Ready-to-use. For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

---

2-Pieace Set of Japanese Vintage Kanna Hand Plane , 長秀 and 儀助, Ready-to-use.:
$90.00

Introduction:

You may think that the price is a little high. You can buy a used, unmaintained Kanna around $30 to $50 on the ,but if you don\'t have much experience with Kanna, maintaining it so that it can be used properly will not work even if you spend days doing it properly.It is generally said that even a carpenter needs five years to become proficient with a plane, and it is the most difficult tool among carpentry tools.

To improve your Kanna skills, it is essential to first use a plane that has been fully maintained for immediate use.

I think that the price is worth the time and effort of maintenance.In particular, the superiority of Japanese Kanna is more evident with a new base.

Product:

This is a hand plane “Kanna” fully maintained for ready to use. Please check video and photo and feel free to contact us for more details.

These used Kannas are.

• Cleaned, disinfected and removed the rust, blacking with gun blue liquid.
• Double-edged blade.
• The wood Dai is used but almost new.
• The surface of the Dai-sole is tuned in two-point touch.

(A)長秀/NAGAHIDE, Vintage Original

• - Blade: 66.0mm (2.60in) Wide (lower) x 112mm (4.41in) Hight,used.
• - Wood Bottom Dai: 82mm (3.23in) Wide x 274mm (10.79in) Length x 33.5mm (1.30 in) Thickness, used.

(B)GISUKE / 儀助 , Contemporary Original

• - Blade: 56mm (2.20in) Wide (lower) x 102mm (2.20in) Hight、used.
• - Wood Bottom Dai: 72mm (6.77in) Wide x 258mm (10.16in) Length x 34mm (1.34in) Thickness, used.

Inmy video, I performed planing a SPF wood timber using each Kannas. Asa result of fine tuning of wood bottom and sharpening the bladeedges, wood shavings leaped out from Kanna were very thin like a silkfabric.

Whenyou buy a used Kanna you have to set up it to planning in smoothly byyourself. Not only sharpening the blade-edge, but also reshape theblade, also sharpening the chip-breaker blade (counter-blade) andtune the sole of wood bottom “Dai”. It took a few days to havethese tuning.

Ifyou have Kanna for the first time you might be confused because ofmany things to do. (See the below website)

Nowyou have a chance to get ready-to-use.For the price of an unused vintage tool, you can purchase two different sized Kanna.As soon an the Kanna arrives,you can use it but you should re-sharpen the blade from time to timeto maintain its use the whetstone #1,000 grit for mid and #6,000 grit forfinal sharpening the blade-edge (See the set-up Kanna:Learn– Learn – Kakuri Sangyo Grit:Amazon.com:KING Whetstone Starter Set Include 1000/6000 Grit CombinationWhetstone made in Japan

IF YOU WANT EITHER ONE, NOT BOTH, OR IF YOU WOULD LIKE TO PURCHASE ONE OF THIS LISTING WITH OTHER LISTING ITEM, FEEL FREE TO CONTACT EMS, about 10 days.

Note:

Importduties, taxes and charges are not included in the item price orshipping charges. These charges are the buyer s responsibility.·Please check with your country\'s customs office to determine whatthese additional costs will be prior to offerding/buying.

2-Pieace Set of Japanese Vintage Kanna Hand Plane , 長秀 and 儀助, Ready-to-use.

$90.00