Skate & explore with longboards 6\" x 6\" for Sale

On eBay Now...

Skate & explore with longboards 6\" x 6\" For Sale

$Skate & explore with longboards 6\$
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Skate & explore with longboards 6\" x 6\":
$7.00

Skate & explore with longboards 6\" x 6\"

great for a gift or birthday!

How to apply your decal.

First and foremost, clean the surface where the decal will be applied. Be sure to remove any grime, dirt, grease, dust, or anything that will prevent the decal from fully sticking. Depending on the surface, you may want to use a damp washcloth, glass cleaner, or other common household materials to clean the surface. Make sure the surface is completely dry before beginning the application process.

Remove the backing. Apply pressure first to each side and make sure your decal is on the transfer tape. Go slow and Test peel before taking the whole backing off. When removing the backing, it is better to remove part of it and begin applying the decal to the surface as opposed to removing the backing all at once, especially for larger decals. This will make it easier to manage the decal and make sure that it is applied smoothly. **For vinyl lettering, it is important to note that you will first position and then remove the backing.

Position your decal how you want it. Use a level if necessary. Tip: Apply a strip of masking tape to the top of your decal and use that to properly position the decal and hold it in place. You can create a ‘hinge’ with the masking tape allowing you to lift the decal prior to removing the backing.

Apply pressure. Start in one spot (usually a corner or top) and begin applying pressure using your hand or a squeegee, gradually working your way across the entire decal. Go slow, making sure to remove any excess air bubbles.

Finishing touches. Once you’ve reached this point, use a squeegee to remove any minor air bubbles and remove all backing. You can now use the backing as a protective barrier between to protect your decal from scratches while using a squeegee. This step may include cutting off extra materials (especially for perforated decals). If you used masking tape to position your decal, you can remove that here as well.