10x12 Inch Welded Blacksmith Firepot 2600F Rated Blacksmith's Welded Coal Forge For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

---

10x12 Inch Welded Blacksmith Firepot 2600F Rated Blacksmith's Welded Coal Forge:
$188.99

• Wide Application: The firepot is one of the most important tools in a blacksmith's workshop. Ideal for forging hammers, punches, tongs and other metalworking jobs with the help of a hand crank blower.
• Upgrade Design: The assembled firepot weighs about 40 pounds and uses with a clinker breaker, weighted ash dump, and air-inlet pipe. The ash dump/air pipe system is one piece and bolted to the firepot. Disassembled firepot require a 9/16" socket/wrench to connect the ash dump and clinker breaker.
• Firepot: Inside dimensions are approximately 10" x 12" x 3.5". Constructed entirely from 1/2" thick plasma cut plate steel, welded inside and out. The lip is 1/4-inch plate steel. Ideal for forging where there are at least a 10.5" x 12.25" rectangular hole.
• Ash Dump: 12" long, 3.5" square. It has two tabs on it for fixing two 3/8" bolts to the firepot. (Bolts included) It has a weighted ash dump door that allows you to dump coal ash fed through the clinker breaker. The air inlet pipe is 3" round (outer diameter) and 4" long.
• Clinker Breaker: Constructed from a piece of 1/2" thick steel plate with a 1/2" round steel handle. It fits in a slot in the ash dump. The round hole in the bottom of the firepot is 3" in diameter and the clinker breaker is 2.5" in diameter, leaving a 1/4" slot around it to let air from the blower into the firepot.

• The firepot is one of the most important tools in a blacksmith's workshop.
• Ideal for forging hammers, punches, tongs and other metalworking jobs with the help of a hand crank blower.

Firepot:

• Weigh about 40 pounds
• Inside dimensions are approximately 10" x 12" x 3.5"
• Ideal for forging where there are at least a 10.5" x 12.25" rectangular hole
• The round hole in the bottom of the firepot is 3" in diameter

Ash Dump:

• 12" long, 3.5" square
• It has a weighted ash dump door that allows you to dump coal ash fed through the clinker breaker

Air inlet pipe:3" round (outer diameter) and 4" long

Clinker Breaker:

• With a 1/2" round steel handle
• Fit in a slot in the ash dump
• 2.5" in diameter, leaving a 1/4" slot around it to let air from the blower into the firepot

• Use with a clinker breaker, weighted ash dump, and air-inlet pipe. The ash dump/air pipe system is one piece and bolted to the firepot.
• During operation, fuel is placed in or on the hearth and ignited. Move the air source to introduce additional air into the fire through the tuyere. With more air, the fire consumes more fuel and burns hotter.

• Made entirely from 1/2-inch thick, plasma cut plate steel, and is welded inside and out for long-lasting reliability.
• Best substitute for cast iron firepot, it will not develop any cracking like cast iron when the fabricated firepot is exposed to temperature changes.

Payment:

Kindly know we accept PayPal payment only.

Shipping Policy:

Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours.

Normally it takes 2-5 days of shipping for US address, please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.

Return & Warranty:

1.We accept 30 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 30 days of receipt, and we shall be happy to exchange or refund.

2.Leave a message note in returned box quoting your item(s) ID and buyer ID.

3.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

4.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

5.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return.

Contact us:

If you have any problem about the products and purchase, please feel free to contact us. We will try our best to solve your problem. WE WILL REPLY YOU ASAP.

About response:

Please contact us before leaving Netural or Negative response if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues.

We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive response to all our customers.

If you are satisfied with our service, please kindly leave us a 5-star response. Thanks!

Coal Forge , 10x12 inch Blacksmith’s Welded Coal Firepot with Stand Blacksmith

$279.99

Blacksmith’s Welded Coal Firepot with Stand Blacksmith Coal Forge 10x12 inch

$299.99

Fiery Furnace Blacksmith - Firepot 10x12-inch For Blacksmithing Forge - USA MADE

$215.00

Reprint Family Portrait Around 1900 Framed 10x12 Inch Read

$18.90

Menu-Covers 10 X 12 Inch Restaurant - 2 Pack Menu Holder 4 Page 8 View Premium

$17.95

1885 ERA LARGE 10 X 12 INCH PHOTO OF FAMILY WITH CHILD & DOG COLLETON CO SC

$22.00

Welded Blacksmith Firepot 10x12 Inch 2600F Rated Blacksmith's Welded Coal Forge

$248.29

RARE VINTAGE 10X12 inch PHOTOGRAPH OF RUSSIAN BALALAIKA ORCHESTRA. CIRCA 1920.

$99.00